Description

Metal frame (epoxy paint), 70 litres capacity, polyethylene tank.
Two electric motors (12 volts): one to turn the spreader plate and the second an actuator motor to open and close the electric trap.
24 metres working width with 28 metres overlap. Broadcast spraying.
Easy, precise adjustment with 0 to 35 scale. Flow rates from 0 to 445 kg/hour.
Electric hatch opening and closing. Projection density adjustment lever.
Fits directly onto the quad’s luggage rack.
Slug spreaders can also be attached to tractors, sprayers or other front- or rear-mounted implements.
To use this slug pellet on turf or ryegrass, choose T24 RYE GRASS 70 LITERS.
The T24 can also spread small seeds such as rapeseed, clover, alfalfa and mustard from 4 to 18 meters, and meadow-type seeds from 4 to 6 meters (with ryegrass device), at different rates (see adjustment tables). Slug pellets can be adjusted from 2.5 to 24 meters and ryegrass from 1.5 to 6 meters with the width adjustment box.
The standard control box or width adjustment box has a 1.5 m cable with a 3-pin plug for the power supply and a 4.5 m cable for the 7-pin plug connected to the distributor.
The 70-litre tank can hold approximately 50/60 kg of product, depending on the size of the product used.
Original green hopper. Also available in translucent white hopper on request and without additional cost.
For a larger tank capacity, choose the T28 120 LITERS.
DELIMBE slug pellets offer very good value for money.

Standard control box equipped with two switches, one for opening and closing the hatch and a second for starting or stopping the plate. A red light comes on when the plate is rotating.
Width adjustment control box equipped with two switches and a potentiometer graduated from 0 to 30, allowing the width to be adjusted from 4 to 24 metres.
A 3-point linkage on the tractor hitch (front and rear compatible). Or a ball hitch for quad bikes, tractors or farm vehicles. Quick and easy installation for both types of hitch.
A 3-point hitch on the tractor’s lift (compatible with front and rear).
A self-supporting ball hitch for tow balls, designed to be attached to a car, quad bike, tractor or agricultural vehicle tow ball. Quick installation.
A pre-drilled base to weld onto a tool. The base is designed to facilitate the installation of the machine on other work tools.