T18

- DELIMBE T18 -

• Small seeds seeder/drill with blower and descent by pipes for plant cover, placed on the stubble cultivator.
  
  

Description : 

• 300 liter polyethylene tank capacity: 1 to 12 outlets.
  
  
• The seeder is equipped with a blower driven by a 12 volt electric motor.
  
  
• The distribution roller is driven by a self-regulating electric motor.
  
  
• The airflow transfers the seed into flexible plastic pipes/hoses with an inside diameter of 30mm.
  
  
• We recommend this device for ground tools up to 7 meters or for devices requiring 1 to 12 outputs.
  
  
  

Options :

For the control boxes we offer several choices between the standard and different DPA.

• A standard control box with three switches:

1. A first switch to start the wind tunnel.
   
   
2. A second switch with a light to start and stop the distribution at the end of the field.
   
   
3. A third dial switch with scale from 0 to 30 for flow, adjustable directly from the cab.

• A DPA with sensor to be positioned either on a wheel, on one end of the roller or on the back of a disc.
  
  
• A DPA with ISO plug by taking the tractor information on the 7-pin plug.
  
  
• And a DPA with a GPS antenna positioned outside the cabin.
  
  
• For a larger flow rate, choose the medium yellow and/or red high-flow spline.
  
  
• The splitters.
  
  
• The pipe roll of 25 meters.
  
  
• The loading bridge.
  
  
  

Advice:

• The microgranulator and seeder small and large seeds is also specialized for vines. For this purpose it is necessary to order special vine splitters in the section "spare parts".
  
  
• Used on the weeder harrow: The device allows to regenerate the meadows in the spring. The Delimbe T18 wind blower can be mounted on a harrow, cultivator, combine cutter or any type of tillage machine.
  
  
• On stubble cultivator: Seeds should be dispersed on the fly before the roll so that the soil spray covers the seedling.
  
  
• Security: It is essential to provide a loading bridge.
  
  
• We recommend this device for ground tools up to 6 meters or for devices requiring 1 to 12 outputs.
  
  
• For larger hopper capacity use the T20.
  
  
  

Dimensions of the machine: