SALT SPREADER T11

Reference T11SALROUTE80L-120L

  • Electric salt spreader for road, salt extraction.

  • Capacity 80 or 120 liters.

  • Working width of 4 meters.

  • Warning, the machine can't operate without the addition of a control box (standard or width adjustment box).

  • Nomenclature : NC84323100.


(Technical notice to download below the pictures by clicking on "Adjustment tables")

810 tax excl. €

Control box to be provided with the device ::

CONTROL BOX T11

CONTROL BOX T11

€235.00 HT

CONTROL BOX DOUBLE SETTING T11

CONTROL BOX DOUBLE SETTING T11

€315.00 HT

Quantity

- DELIMBE SALT SPREADER T11 -

Electric road salt machine, working width 4 meters, suitable for dry or wet salt, available in 80 and 120 liters.

DESCRIPTION OF THE SALT SPREADER
  • The T11 DELIMBE road salt spreader is suitable for dry or wet salt.

  • It sits in the back of the vehicle (utility car, quad, small truck).

  • Working width 4 meters (Stainless steel worm and spreading tray 4 meters).

  • Operating speed between 5 and 15 km/h.

  • Distribution tray and worm screws operated by two waterproof 12-volt electric motors.

  • Adjustable salt/sand flow with 0 to 30 scale.

  • Fully aluminum device and 80, 120 liters polyethylene tanks.

  • Auger 20 A and distribution tray 15 A.


OPTIONS FOR ROAD SALT T11
  • The salt spreader must be equipped with a control box, there are two models, the standard box for the start-up and the width adjustment box that allows in addition to vary the width of salt spreading between 2 and 4 meters.

  • Possibility to modulate the tray block to orient the spreading on the right or left.

  • Different types of coupling are possible depending on the capacity of the chosen hopper: 3-point couplingattaching ball and ball hitch cart.


CHARACTERISTICS OF THE SALTER T11
MODEL  SALT SPREADER T11
TYPE OF MATERIAL ELECTRIC SALT SPREADER FOR ROAD
CAPACITY 80 OR 120 LITERS
WORKING WIDTH 4 METERS
COMPOSITION  WHOLE ALUMINIUM AND POLYETHYLENE TANK
FEEDING/ALIMENTATION TWO 12 VOLTS ELECTRIC MOTORS
PRODUCTION CREATED AND MANUFACTURED IN FRANCE AT PONT DE L'ARCHE



DIMENSIONS OF THE SALT SPREADER T11
T11 80L T11 120L
WIDTH 650 MM 650 MM
LENGTH 1000 MM 1000 MM
HEIGHT 850 MM 900 MM
WEIGHT 40 KGS 45 KGS



*Advice:

  • Used as a preventative at 4g / m², the capacity of the tank allows to salt a road of 6600m by 4m wide without filling the tank.

  • Used as a preventative at 10g / m² the capacity of the tank allows to salt a road of 5000m by 4m wide without filling the tank.

  • In curative at 15g / m² (dose not to be exceeded) the treated surface is 3330m for a 4m wide road. An increase in dosage is not a guarantee of better efficacy (it is often the water that is missing most).

  • 7 to 10 g / m² are enough for prevention, 10 to 15 g / m² for curative. In addition, it is better to spread 2x15 g / m² than 1x30 g / m².
T11SALROUTE70L

Data sheet

Compositions ENTIEREMENT EN ALUMINIUM ET CUVE EN POLYETHYLENE
Styles SALEUSE ROUTE POUR EXTRACTION DU SEL
Properties FABRICATION FRANCAISE - NOMENCLATURE : NC84248290

Download

Associated products