Electric road salt machine, working width 4 meters, suitable for dry or wet salt, available in 70 and 120 liters.
Working width: 4 meters.
It is supplied with a control box in the cabin which makes it possible to adjust the rotational speed of the flow rate.
Adjustable salt / sand flow with graduation from 0 to 30.
All aluminum unit and 70, 120 polyethylene tanks.
To be placed at the back of the vehicle (utility vehicle, small truck ...).
Suitable for dry or wet salt.
Speed of use between 5 and 15km / h.
Potentiometer to vary the spreading width of salt between 2 and 4 meters.
Possibility of modulating the plate/disc to direct the spreading to the right or to the left.
Different types of attach possible depending on the capacity of the hopper chosen: 3-point hitch, self-carried on ball, trolley.
Dimensions of the device:
T11 70L: Width: 650 mm / Length: 1000 mm / Height: 850 mm / Empty weight: 25 kgs.
T11 120L: Width: 650 mm / Length: 1000 mm / Height: 900 mm / Empty weight: 30 kgs.
Composition: Marine aluminum chassis and polyethylene tank.
Used as a preventative at 7g / m², the capacity of the tank allows to salt a road of 6600m by 4m wide without filling the tank.
Used as a preventative at 10g / m² the capacity of the tank allows to salt a road of 5000m by 4m wide without filling the tank.
In curative at 15g / m² (dose not to be exceeded) the treated surface is 3330m for a 4m wide road. An increase in dosage is not a guarantee of better efficacy (it is often the water that is missing most).
7 to 10 g / m² are enough for prevention, 10 to 15 g / m² for curative. In addition, it is better to spread 2x15 g / m² than 1x30 g / m².