Description

DELIMBE T24 70 LITRES
– CENTRIFUGAL SLUG PELLETS SPREADER 70L –

The T24 is a distributor for slug pellets and small seeds with a working width of 24 metres. It’s a versatile seed applicator. It is suitable for quad bikes and tractors (ATV), or any other front or rear-mounted implement.

DESCRIPTION OF THE SLUG PELLETS & SEEDS DISTRIBUTOR

• Metal frame (epoxy paint), 70 litres capacity, polyethylene tank.
• Two electric motors (12 volts): one to turn the spreader plate and the second an actuator motor to open and close the electric trap.
• 24 metres working width with 28 metres overlap. Broadcast spraying.
• Easy, precise adjustment with 0 to 35 scale. Flow rates from 0 to 445 kg/hour.
• Electric hatch opening and closing. Projection density adjustment lever.
• Fits directly onto the quad’s luggage rack.
• Slug spreaders can also be attached to tractors, sprayers or other front- or rear-mounted implements.
• To use this slug pellet on turf or ryegrass, choose T24 RYE GRASS 70 LITERS.
• The T24 can also spread small seeds such as rapeseed, clover, alfalfa and mustard from 4 to 18 meters, and meadow-type seeds from 4 to 6 meters (with ryegrass device), at different rates (see adjustment tables). Slug pellets can be adjusted from 2.5 to 24 meters and ryegrass from 1.5 to 6 meters with the width adjustment box.
• The standard control box or width adjustment box has a 1.5 m cable with a 3-pin plug for the power supply and a 4.5 m cable for the 7-pin plug connected to the distributor.
• The 70-litre tank can hold approximately 50/60 kg of product, depending on the size of the product used.
• Original green hopper. Also available in translucent white hopper on request and without additional cost.
• For a larger tank capacity, choose the T28 120 LITERS.
• DELIMBE slug pellets offer very good value for money.

ANTI-SLUGS SPREADER & SEEDS DISTRIBUTOR OPTIONS

• Standard control box equipped with two switches, one for opening and closing the hatch and a second for starting or stopping the plate. A red light comes on when the plate is rotating.
• Width adjustment control box equipped with two switches and a potentiometer graduated from 0 to 30, allowing the width to be adjusted from 4 to 24 metres.
• A 3-point linkage on the tractor hitch (front and rear compatible). Or a ball hitch for quad bikes, tractors or farm vehicles. Quick and easy installation for both types of hitch.
• A 3-point hitch on the tractor’s lift (compatible with front and rear).
• A self-supporting ball hitch for tow balls, designed to be attached to a car, quad bike, tractor or agricultural vehicle tow ball. Quick installation.
• A pre-drilled base to weld onto a tool. The base is designed to facilitate the installation of the machine on other work tools.