Description
– DELIMBE SLUG PELLET SPREADER T24 RYE GRASS –
The T24 70 litres is a slug pellets and small seed applicator with a working width of 24 metres. It’s a versatile machine. It is suitable for quad bikes and tractors (ATV), farm vehicle or any other front or rear-mounted tool.
DESCRIPTION OF THE T24 SLUG & SEED SPREADER
- Metal frame (epoxy paint), 70-liter capacity, polyethylene tank.
- Two 12-volt electric motors: one to turn the spreader plate and the second an actuator motor to open and close the electric hatch.
- Effective width 24 metres with overlap up to 28 metres (with high-density slug control).
- Easy, precise adjustment with a graduated scale from 0 to 35. Flow rates from 0 to 445 kg/hour.
- Electric hatch opening and closing. Projection density adjustment lever.
- Fits directly onto the quad’s (ATV’s) luggage rack.
- Slug spreaders can also be attached to tractors, sprayers or other front- or rear-mounted tool.
- This DELIMBE T24 is equipped with a ryegrass agitator for turf/grass. With this equipment, the T24 can do everything from slug pellets to small seeds and ryegrass.
- The T24 can also spread small seeds such as rapeseed, clover, alfalfa and mustard from 4 to 18 meters, and meadow-type seeds from 4 to 6 meters (with ryegrass device), at different rates (see adjustment tables). Slug pellets can be adjusted from 2.5 to 24 meters and ryegrass from 1.5 to 6 meters with the width adjustment box.
- The standard control box or width adjustment box has a 1.5 m cable with a 3-pin plug for the power supply and a 4.5 m cable for the 7-pin plug connected to the distributor.
- The 70-litre tank can hold approximately 50/60 kg of product, depending on the size of the product used.
- Original green hopper. Also available in translucent white hopper on request and without additional cost.
- For larger tank capacities, choose the T28 RAY GRASS 120 LITRES slug pellets.
- DELIMBE slug pellets offer very good value for money.
SLUG PELLETS APPLICATOR T24 OPTIONS
- Standard control box with 2 switches, one for opening and closing the hatch and a second on/off switch with a red LED.
- Width adjustment control box with two switches and a potentiometer with a scale from 0 to 30 for width adjustment from 4 to 24 meters.
- A 3-point linkage on the tractor hitch (front and rear compatible). Or a ball hitch for quad bikes, tractors or farm vehicles. Quick and easy installation for both types of hitch.
- A pre-drilled base to weld onto a tool. The base is designed to facilitate the installation of the machine on other work tools.
- A more corrosion-resistant stainless steel tray.