Description

DELIMBE T28 120L
– CENTRIFUGAL ANTI-SLUG SPREADER –

The T28 is a slug pellet and small seed distributor with a 28-meter working width. It is available in two versions (70 and 120 liters). It’s a versatil machine. It is suitable for quad bikes and tractors, or any other front or rear-mounted implement.

DESCRIPTION ANTI-SLUG SPREADER

• Metal frame (epoxy paint), 120-liter capacity, polyethylene tank.
• A 12-volt electric motor to turn the spreader plate and an electric jack kit to open and close the hatch.
• Effective width 28 metres with overlap up to 30/31 metres (with high-density slug control).
• Easy, precise adjustment with 0 to 35 scale. Flow rates from 0 to 445 kg/hour.
• Electrical opening and closing of the hatch.
• Joystick for projection density orientation. On-the-fly projection.
• Fits directly onto the quad’s luggage rack.
• Slug spreaders can also be attached to tractors, sprayers or other front- or rear-mounted implements.
• The T28 can also spread small seeds such as rapeseed, clover, alfalfa and mustard from 4 to 18 meters, and meadow-type seeds from 4 to 6 meters (with ryegrass device), at different rates (see adjustment tables). Slug pellets can be adjusted from 2.5 to 28 meters and ryegrass from 1.5 to 6 meters with the width adjustment box.
• The standard control box or width adjustment box has a 1.5 m cable with a 3-pin plug for the power supply and a 4.5 m cable for the 7-pin plug connected to the distributor.
• The 70-litre tank can hold approximately 50/60 kg of product, depending on the size of the product used.
• Original green hopper. Also available in translucent white hopper on request and without additional cost.
• DELIMBE slug pellets offer very good value for money.
• To get through grass with this slug pellet, choose T28 SPECIAL RAY-GRASS 120 LITRES.

SLUG PELLET SEEDER OPTIONS

• Standard box with two switches, one for opening and closing the hatch and a second on/off switch with a red LED.
• Width adjustment control box with two switches and a potentiometer with a scale from 0 to 30 for width adjustment from 4 to 28 meters.
• A three-point linkage on the tractor hitch (front and rear compatible). Or a ball hitch for quad bikes, tractors or farm vehicles. Quick and easy installation for both types of hitch.
• A pre-drilled base to weld onto a tool. The base is designed to facilitate the installation of the machine on other work tools.