Description
– DELIMBE T18 HYDRAULIC – GREEN COVER –
Microgranulator and fertilizer drill, small and large seeds. Electric distribution, hydraulic blower and hose descent. Versatile seed drill for use with all types of soil-tilling equipment (curly harrow, stubble cultivator, combine cutter, etc.). Used for a wide range of tasks, it can be used to sow insecticide micro-granules, starter fertilizers, weed-killing granules, cereals, small and large seeds.
DESCRIPTION T18 PLANT COVER SEEDER
-
- The T18 seed drill/microgranulator is equipped with a blower driven by a hydraulic motor.
- Electrical distribution is provided by a spline.
- An electric geared motor drives the spline for seed distribution. The rotation speed of the spline is controlled to regulate the flow rate.
- The air flow transfers the seed into the corrugated hoses with an internal diameter of 30 mm.
- To better disperse the seeds, it’s best to use splitters at the end of the hose.
- The working width of each spark gap is 50 cm to 1 meter, depending on the height of the layout: they must be installed so that the seed projections cross each other.
- The T18 agricultural seed drill is available in two other versions:
- The T18 DOUBLE with double distribution.
T18 MICROGRANULATOR OPTIONS
- Control units: we offer several choices between standard and different systems DPAE (Flow Proportional to Electronic Advance) systems.
- A standard control box with 8 meters of wire: 2 meters from the plug to the control box and 6 meters from the control box to the device. For other lengths, please consult us.
- A DPA with sensor to be positioned either on a wheel, on the end of a roller or on the back of a disc.
- A DPA with ISO connector, taking information from the tractor via the 7-pin connector.
- And a DPA with a GPS antenna positioned outside the cab.
-
- There are 4 types of spline: White (very low flow), Green (low flow), Yellow (medium flow) and Red (high flow). For higher flow rates, choose the yellow medium flow spline and/or the red high flow spline.
- Pipe supports for changing the working width.
- A mounting base that adapts to the T18 chassis for easy attachment to the work tool.
- Shatterers for better seed dispersal.
- 25-meter hose reel.
- The loading bridge.
- A 15-turn timing motor can be fitted on request, depending on your requirements.
USE & ADVICE ON VARIOUS TILLAGE TOOLS
- On a curtain harrow: The unit helps to regenerate meadows in spring. The Delimbe T18 air seeder with blower can be mounted on a harrow, stubble cultivator, combine cutter or any other soil-working machine.
- On a stubble cultivator: Seeds should be broadcast before the roller so that the soil projected by the roller covers the seedbed.
- On a combine harvester: The small seeds are sown under the combine harvester and are covered by the falling chopped straw.
- On a hoe: The T18 sows small seeds or ryegrass between rows of corn-type crops.
- For vineyards and market gardening: The microgranulator and cover crop seeder is also specialized for vineyards and market gardening. For this purpose, you need to order the special vineyard and market gardening splitters in the “spare parts” section. Placed on the soil cultivation tool, the T18 can be used to sow a strip of grass between the rows of vines.
- For fruit trees: The T18 small and large seed drill sows a grassy strip between the trees.
- Safety: A loading platform is essential.
- You can change your working width easily with pipe supports. The brackets are designed to be replaced simply by unbolting and replacing your existing bracket with a new one. We do not recommend plugging the outlets, as this may damage the T18 fertilizer drill and impair its operation.
- We recommend this device for ground tools up to 7 meters or for equipment requiring 1 to 12 outlets. For larger hopper capacities or working widths over 7 meters, use the T20.
- We recommend the T18 hydraulic seeder for soil tools from 1 to 7 metres wide, or for regular seeding of large seeds. This is because the hydraulic blower is more powerful than on a standard T18, and the seeds are thrown further. We particularly recommend it for regular sowing of large seeds.
CHARACTERISTICS OF THE HYDRAULIC SEEDER
Model | T18 HYDRAULIC – GROUND COVER |
Type of equipment | HYDRAULIC MICROGRANULATOR FOR GREEN COVER – PNEUMATIC SEED DRILL – FERTILIZER SPREADER – MARKET GARDENER SEED DRILL – VINEYARD SEED DRILL – SMALL AND LARGE SEED DISTRIBUTOR FOR STUBBLE CULTIVATOR, HARROW… |
Capacity | 300 LITRES |
Number of outputs | 1 TO 12 OUTLETS (UP TO 7 METRES WIDE) |
Outlet diameter | 30 MM INSIDE |
Composition | POLYETHYLENE TANK – STEEL FRAME BAKED-ON EPOXY PAINT |
Power supply | ELECTRIC MOTOR 12V/100W (DISTRIBUTION) – 40 TURNS
HYDRAULIC MOTOR (BLOWER) |
Provenance | DESIGNED AND MANUFACTURED IN PONT DE L’ARCHE, FRANCE |
DIMENSIONS OF THE T18 HYDRAULIC SEEDER FOR SMALL AND LARGE SEEDS
WIDTH | 680 MM |
LENGTH | 1200 MM |
HEIGHT | 900 MM |
WEIGHT | 60 KGS |
DISCOVER OUR FULL RANGE OF SEEDERS FOR SALE
PLANT COVER / MICROGRANULATORS – MARKET GARDENING / VINEYARD – FERTILIZER