DPA WHEEL SENSOR: The sensor is to be positioned on a wheel (or on a roller, back of a disc, etc.). It is adjustable and must be positioned between 5 mm and 1 cm from a moving metal object. It gives speed information.

Operation: Use the setting table, double multiply to find the table number kg / hour = Result. The result found will be entered on the potentiometer.

- The tractor must move to obtain speed information and operate the machine. When the working speed is reached, the memorized speed button is pressed, the green light comes on, the DPA is activated.

- Weighing: Press the priming button for 1 minute. We obtain g / minute which we transform into kg / hour. Adapt the setting in relation to the calculation.

- Priming: Used to operate the spline without the tractor moving (corner of fields).

DPA ISO: Connect the iso speed plug to the tractor (small round 7-pin plug).

Operation: Use the setting table, double multiply to find the table number kg / hour = Result. The result found will be entered on the potentiometer.

- The tractor must move to obtain speed information and operate the machine. When the working speed is reached, the memorized speed button is pressed, the green light comes on, the DPA is activated.

- Weighing: Press the priming/amorçage button for 1 minute. We obtain g / minute which we transform into kg / hour. Adapt the setting in relation to the calculation.

- Priming:amorçage: Used to operate the spline without the tractor moving (corner of fields).